- Brick Making Machinery[1]
- Cement Making Machinery[6]
- Drying Equipment[8]
- Conveyors[1]
- Crusher[10]
- Mine Mill[10]
- Mineral Separator[9]
- Mining Feeder[10]
- Sand Washer[1]
- Vibrating Screen[8]
- Contact Person : Ms. wang Jenny
- Company Name : Gongyi Songling Mining Machinery Co., Ltd.
- Tel : 86-371-64571988
- Fax : 86-371-64373987
- Address : Henan,gongyi,North of Yong'an Road ,Gongyi City
- Country/Region : China
- Zip : 450052
Related Product Searches:PE series mini crusher in laboratory,High Quality,mini crusher in laboratory, mini crusher in laboratory,PE-400*600
mini crusher in laboratory
1. mini crusher in laboratory advantages
Gongyi songling lab jaw crushers have the advantages of big reduction ratio, even granularity, simple structure, reliable working condition, convenient repair and economic operation.
2. mini crusher in laboratory wide application
They are widely used for mine, smelting, building material, road, railway, irrigation works, chemical and materials with compression strength no more than 320 Mpa.
3. mini crusher in laboratory working principle
Jaw crusher plant consists of bracket, jaw, eccentric shaft, jaw plate and ancon plate etc. Eccentric shaft is driven to rotate by motor and jaw runs on adjusted track to crush materials in crushing chamber. The bracket is welded by steel plate. On the front arm of bracket, jaw plate is fixed by wedge-shaped bolt. Edge protection plate is equipped on inside wall of bracket to prevent abrasion.
The moving jaw is a shaped casting with a kinetic jaw plate on the face. The upper part of jaw is hung on upper and lower parts of bracket and supported on ancon plate by eccentric shaft and roller bearing. There equipped flywheel and grooved pulley at both ends of eccentric shaft.
The other end of ancon plate is supported on adjusting beam. Besides supporting jaw, the ancon plate plays the role of insurance during load increase caused by the uncrushed materials entry into crushing chamber. It will be broken to protect other pieces from damage.
Adjusting beam is welded to side wall of bracket. When the discharge door is adjusted smaller, release tie spring and tightens screw, rotate retention screw to make gasket up, insert new gasket to achieve required size of discharge door, turn back retention screw to make jaw press closely the gaskets, rotate nut staybolt and fix it and at last, rotate tie spring tight. Conversely, from small size to large one (draw gasket out).
4. mini crusher in laboratory technical parameters
Model | Feeding Opening(mm) | Max Feed Size(mm) | Capacity (t/h) | Discharge Opening (mm) | Motor Power (kw) | Overall Dimesion(L*W*H) (mm) | Weight (t) |
PE-150×250 | 150×250 | 125 | 1-5 | 10-40 | 5.5 | 875×758×850 | 0.81 |
PE-150×750 | 150×750 | 125 | 5-16 | 10-40 | 15 | 1200×1530×1060 | 3.8 |
PE-250×400 | 250×400 | 210 | 5-20 | 20-60 | 15 | 1450×1315×1296 | 2.8 |
PE-400×600 | 400×600 | 340 | 16-65 | 40-100 | 30 | 1565×1732×1586 | 6.5 |
PE-500×750 | 500×750 | 425 | 45-100 | 50-100 | 55 | 1890×1918×1870 | 10.1 |
PE-600×900 | 600×900 | 500 | 90-180 | 65-160 | 55-75 | 2305×1840×2298 | 15.5 |
PE-750×1060 | 750×1060 | 630 | 110-260 | 80-140 | 110 | 2450×2472×2840 | 28 |
PE series mini crusher in laboratory